The Industrial Fall Protection: Best Picks Of 2024

Sarah Combs By, Sarah Combs
Updated
WELKFORDER 3D-Ring Industrial Fall Protection Safety Harness ANSI/ASSE Z359.11-2014 Compliant Full Body Personal Protection Equipment 5-Point Adjustment Universal 310 lbs
Image credit: Amazon.com

Fall protection is the method of protecting people and equipment from falling due to a sudden drop. Fall prevention methods are used first to ensure that fall hazards are reduced or eliminated in advance. Once these measures have been exhausted, fall arrest systems are implemented to prevent an employee from falling any further.

Fall protection plays an important role in industrial settings, particularly those which involve high-risk activities like operating machinery and operating heavy equipment. Industrial fall protection can be divided into two categories: general and confined spaces. General fall protection refers to the use of protective clothing, harnesses, lanyards, A-frames etc.

Our team, including qualified experts in this area, conducted a survey and carried out it for a great amount of time on finding the right products for industrial fall protection, nearly 14 hours. And after lots of effort, we have done it well. 

 

Our Top Picks

  • SAFETY DESIGN PERFORMANCE: Welkforder Full Body Harness WFH001 are used for fall arrest, positioning, travel restraint, suspension and rescue applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. After a fall, our Full Body Harness will support users and post fall at an angle within 30° to vertical. Each of our products is Individually inspected.
  • ANSI/ASSE Z359.11-2014 & OSHA Compliant: WELKFORDER Full Body Harnesses have the fully passed test report performed at authoritative laboratory in accordance with ANSI/ ASSE Z359.11-2014 and in compliance with the requirements of OSHA 1926.502(d) (16). This harness must be used by a Competent Person. Or the user must read and fully understand the limitations and proper use of the Fall protection equipment, and be properly trained by the Competent Person prior to use.
  • HARDWARE COMPONENTS QUALITY ASSURED: Welkforder Full Body Harness WFH001 has 3 D-Rings all of Min. Breaking strength 5000lbs/22KN, one dorsal D-ring to match any foreseeable fall arrest working condition, two Waist D-ring for better work position only. Five Adjusting mating buckles with stamping steel material of Min. Breaking strength 4000lbs/18KN on adjusting straps for superior fit provides both premium comfort and safety.
  • WEBBING & STITCHING QUALITY ASSURED: Welkforder Full Body Harness is lightweight with webbing of tangle free to help keep you comfortable. All straps are made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 27KN/6000lbs. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported.
  • ERGONOMIC DESIGN FOR PROPER FIT: The combination of "No-loose-ends" shoulders straps, legs straps and chest strap design with Pass-Thru Premium quality alloy steel mating buckles helps reduce both the carried weight and required energy for all-day job performance for users within the capacity range of 130 to 310 pounds (59 to 140 kg). It's General Size great for construction workers, carpenters, painters, roofers, window cleaners etc.
  • WELKFORDER Full Body Harness Kits are ANSI/ ASSE Z359.11-2014, ANSI Z359.13-2013 and OSHA 1926.502(d) (16) complaint. This harness Kit must be used by a Competent Person. Or the user must read and fully understand the limitations and proper use of the Fall protection equipment, and be properly trained by the Competent Person prior to use.
  • WELKFORDER Full Body Harness has one dorsal D-Ring with Min. Breaking strength 5000lbs/22KN. Five Adjusting mating buckles with stamping steel material are of Min. Breaking strength 4000lbs/18KN. Snap & Rebar Hooks used on Shock Absorber Stretchable Lanyard are self-locking with minimal tensile break strength of 5,000 lb. and a 3,600 lb. gate rating. All Metal Components are ANSI/ASSE Z359.12-2009 Compliant provide both premium comfort and safety.
  • WELKFORDER Full Body Harness Kit have the fully passed test report in accordance with ANSI/ASSE Z359.11-2014 & ANSI Z359.13-2013. Applied to Construction,Roofing, Camping, Window cleaning, and Surveyor etc. Packed in high-quality Oxford Storage Bag.
  • WELKFORDER Full Body Harness Kit Webbing is made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 22KN/5000lbs. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported. All Kit straps are inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage.
  • WELKFORDER Full Body Harness Kit are used for fall arrest, travel restraint, suspension applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. The Shock Absorbers have a maximum deployment distance of 48 inch/1.2m & average arresting force 900lbs after a fall occurred. Each of our harness kit is Individually inspected.
  • WELKFORDER Full Body Harness Kits are ANSI/ ASSE Z359.11-2014, ANSI Z359.13-2013 and OSHA 1926.502(d) (16) complaint. This harness Kit must be used by a Competent Person. Or the user must read and fully understand the limitations and proper use of the Fall protection equipment, and be properly trained by the Competent Person prior to use.
  • WELKFORDER Full Body Harness has one dorsal D-Ring with Min. Breaking strength 5000lbs/22KN. Five Adjusting mating buckles with stamping steel material are of Min. Breaking strength 4000lbs/18KN. Snap & Rebar Hooks used on Shock Absorber Stretchable Lanyard are self-locking with minimal tensile break strength of 5,000 lb. and a 3,600 lb. gate rating. All Metal Components are ANSI/ASSE Z359.12-2009 Compliant provide both premium comfort and safety.
  • WELKFORDER Full Body Harness Kit have the fully passed test report in accordance with ANSI/ASSE Z359.11-2014 & ANSI Z359.13-2013. Applied to Construction,Roofing, Camping, Window cleaning, and Surveyor etc. Packed in high-quality Oxford Storage Bag.
  • WELKFORDER Full Body Harness Kit are used for fall arrest, travel restraint, suspension applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. The Shock Absorbers have a maximum deployment distance of 48 inch/1.2m & average arresting force 900lbs after a fall occurred. Each of our harness kit is Individually inspected.
  • WELKFORDER Full Body Harness Kit Webbing is made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 22KN/5000lbs.All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported. All Kit straps are inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage.
  • ANSI/ASSE Z359.11-2014 & OSHA Compliant: WELKFORDER Full Body Harnesses have the fully passed test report performed at authoritative laboratory in accordance with ANSI/ ASSE Z359.11-2014 and in compliance with the requirements of OSHA 1926.502(d) (16). This harness must be used by a Competent Person. Or the user must read and fully understand the limitations and proper use of the Fall protection equipment, and be properly trained by the Competent Person prior to use.
  • HARDWARE COMPONENTS ANSI/ASSE Z359.12-2009 Certified: WELKFORDER Safety Harness WFH011E has 3 D-Rings all of Min. Breaking strength 5000lbs/22KN, one dorsal D-ring to match any foreseeable fall arrest working condition, two Waist D-rings for better work position only. Leg Straps Tounge Buckles with Min. Breaking strength 4000lbs/18KN equipped with high quality grommets for quick fastening and easy adjustment provide both easy operation and safety.
  • WEBBING & STITCHING QUALITY ASSURED: WELKFORDER Safety Harness Webbing is heavy duty and tangle free to keep you comfortable and safe. All straps are made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 30KN. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported.ecure and supported.
  • SAFETY DESIGN PERFORMANCE: WELKFORDER Safety Harness WFH011E are used for fall arrest, positioning, travel restraint, suspension and rescue applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. After a fall, our Full Body Harness will support users and post fall at an angle within 30° to vertical. Each of our products is Individually inspected.
  • ERGONOMIC DESIGN FOR PROPER FIT: The combination of "No-loose-ends" Shoulders Straps, Chest Strap and Legs Straps equipped with Alloy Steel Yellow Zinc Plated YOKE Tongue Buckles and Shoulder Pad helps reduce both the carried weight and required energy for all-day job performance for users within the capacity range of 130 to 310 pounds (59 to 140 kg). Applied to construction workers, carpenters, painters, roofers, tower climbers, window cleaners etc.
  • ANSI/ASSE Z359.11-2014 & OSHA Compliant: WELKFORDER Full Body Harnesses have the fully passed test report performed at authoritative laboratory in accordance with ANSI/ ASSE Z359.11-2014 and in compliance with the requirements of OSHA 1926.502(d) (16). This harness must be used by a Competent Person. Or the user must read and fully understand the limitations and proper use of the Fall protection equipment, and be properly trained by the Competent Person prior to use.
  • HARDWARE COMPONENTS ANSI/ASSE Z359.12-2009 Certified: WELKFORDER Safety Harness WFH001WG has 3 D-Rings all of Min. Breaking strength 5000lbs/22KN, one dorsal D-ring to match any foreseeable fall arrest working condition, two Waist D-rings for better work position only. Waist Tounge Buckle and Leg Tounge Buckles with Min. Breaking strength 4000lbs/18KN equipped with high quality grommets for quick fastening and easy adjustment provide both easy operation and safety.
  • WEBBING & STITCHING QUALITY ASSURED: WELKFORDER Safety Harness Webbing is heavy duty and tangle free to keep you comfortable and safe. All straps are made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 30KN. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported.
  • ERGONOMIC DESIGN FOR PROPER FIT: The combination of "No-loose-ends" Shoulders Straps, Legs Straps and Chest Strap equipped with Alloy Steel Yellow Zinc Plated YOKE Tongue Buckles and Shoulder Pad, Hot-Press Waist Pad helps reduce both the carried weight and required energy for all-day job performance for users within the capacity range of 130 to 310 pounds (59 to 140 kg). General Waist Fitting Size 33'' to 45'' great for construction workers, carpenters, painters, roofers, window cleaners etc.
  • SAFETY DESIGN PERFORMANCE:WELKFORDER Safety Harness WFH001WG are used for fall arrest, positioning, travel restraint, suspension and rescue applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. After a fall, our Full Body Harness will support users and post fall at an angle within 30° to vertical. Each of our products is Individually inspected.
  • WE MET THE STANDARD, THEN ROSE ABOVE IT: ANSI/ ASSE Z359.11-2014 - All of KwikSafety’s full-body harnesses have undergone the “Qualification and Verification Testing of Fall Protection Products.” The THUNDER exceeds the already-rigorous ANSI testing standards and is heavy-duty, high-performance fall protection you can trust to have your back. Working at heights 6 ft or more? Equip yourself with the proper fall arrest system. View the Compliance Label/ Safety Label for more information.
  • WE DON'T CUT CORNERS ON SAFETY: This construction harness is a durable, heavy duty, high performance Full Body Harness that meets and exceeds ANSI/ASSE Z359.11-2014 standards. Our safety harness fall protection is the complete safety package. Be seen and safe with the fluorescent yellow synthetic material. Use with any compatible fall protection safety lanyard, energy absorbers, lifelines, and anchorage lanyards. Safely perform the job knowing the THUNDER fall protection harness has your back!
  • HEAVY DUTY D-RINGS: Our fall arrest harness is fully equipped with two side (2) D Rings and (1) Dorsal Ring suitable for primary fall arrest attachment, travel restraint, and rescue. The construction harness has load bearing straps, made from pure, non-recycled synthetic material that is water repellant, has superior stitching, and resistant against ageing, heat, and abrasion. Ensure a safe and proper fit with three (3) pass-through buckles located on the hips, chest and legs of the harness.
  • OSHA APPROVED: The Occupational Safety & Health Administration assures men and women safe and healthful working conditions by setting standards and providing training, outreach, education, and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels. The THUNDER safety fall protection harness is ideal for a roofer, ironworker, construction work, arborist work, high-rise window cleaning, gutter cleaning, roofing and thatching, and Search and Rescue.
  • PROPER FIT, PROPER PERFORMANCE: Regardless if its a mens or womens harness, correct fit is essential for proper performance. Our adjustable construction safety harness supports users within a small medium large capacity range of 130 to 310 pounds (59 to 140 kg), 4’10” to 6’6” (147 to 198 centimeters) due to the adjustment points. To ensure your harnesses properly fit, see that all buckles are connected, leg and shoulder straps are snug, and chest straps are in the center of the chest area.
  • WELKFORDER Full Body Harness Kits are ANSI/ ASSE Z359.11-2014, ANSI Z359.13-2013 and OSHA 1926.502(d) (16) complaint. This harness Kit must be used by a Competent Person. Or the user must read and fully understand the limitations and proper use of the Fall protection equipment, and be properly trained by the Competent Person prior to use.
  • WELKFORDER Full Body Harness Kit Permanent are used for fall arrest, travel restraint, suspension applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. The Shock Absorbers have a maximum deployment distance of 48 inch/1.2m & average arresting force 900lbs after a fall occurred. Each of our harness kit is Individually inspected.
  • WELKFORDER Full Body Harness Kit Permanent have the fully passed test report performed at laboratory in accordance with ANSI/ASSE Z359.11-2014 & ANSI Z359.13-2013. Applied to Construction, Climbing, Roofing, Camping, Window cleaning, and Surveyor etc. Packed in Nonwoven Bag.
  • WELKFORDER Full Body Harness Kit Permanent Webbing is made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 22KN/5000lbs. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported. All Kit straps are inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage.
  • WELKFORDER Full Body Harness has one dorsal D-Ring with Min. Breaking strength 5000lbs/22KN. Five Adjusting mating buckles with stamping steel material are of Min. Breaking strength 4000lbs/18KN. Snap Hook used on Shock Absorber Stretchable Lanyard are self-locking with minimal tensile break strength of 5,000 lb. and a 3,600 lb. gate rating. All Metal Components are ANSI/ASSE Z359.12-2009 Compliant provide both premium comfort and safety.
  • WELKFORDER Full Body Harness has one dorsal D-Ring with Min. Breaking strength 5000lbs/22KN. Five Adjusting mating buckles with stamping steel material are of Min. Breaking strength 4000lbs/18KN. Snap Hook used on Shock Absorber Stretchable Lanyard are self-locking with minimal tensile break strength of 5,000 lb. and a 3,600 lb. gate rating. All Metal Components are ANSI/ASSE Z359.12-2009 Compliant provide both premium comfort and safety.
  • WELKFORDER Full Body Harness Kit Permanent have the fully passed test report performed at laboratory in accordance with ANSI/ASSE Z359.11-2014 & ANSI Z359.13-2013. Applied to Construction, Climbing, Roofing, Camping, Window cleaning, and Surveyor etc. Packed in Oxford Cloth Bag.
  • WELKFORDER Full Body Harness Kit Permanent are used for fall arrest, travel restraint, suspension applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. The Shock Absorbers have a maximum deployment distance of 48 inch/1.2m & average arresting force 900lbs after a fall occurred. Each of our harness kit is Individually inspected.
  • WELKFORDER Full Body Harness Kits are ANSI/ ASSE Z359.11-2014, ANSI Z359.13-2013 and OSHA 1926.502(d) (16) complaint. This harness Kit must be used by a Competent Person. Or the user must read and fully understand the limitations and proper use of the Fall protection equipment, and be properly trained by the Competent Person prior to use.
  • WELKFORDER Full Body Harness Kit Permanent Webbing is made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 22KN/5000lbs. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported. All Kit straps are inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage.
  • UNIQUE FEATURES: Our SRL has a durable aluminum housing, locking forged steel snap hook, steel carabiner, and 1-inch ultrahigh molecular weight webbing with sewn-in fall indicator.
  • DURABLE AND INNOVATIVE: The first ever ANSI designated Class A self retracting lifeline, the SafeWaze 11' SRL features a mobility enhancing swivel-top and unique braking system that eases shock and greatly minimizes free fall distance.
  • HIGH STRENGTH: This fall protection retractable is encased in a polyester housing that provides extreme strength and durability even in harsh environments.
  • 25 YEARS OF SAFETY: SafeWaze is a Concord, North Carolina-based growing small business singularly focused on making the highest quality fall protection equipment. Our mission is to save and protect the lives of workers at height.
  • USABILITY: Our retractable lifelines are compact, lightweight and easy to transport. The SafeWaze 11’ SRL model has a maximum working load of 310 lbs (140.61 kg) and is used as a single person fall protection device. Meets OSHA 1926.502, ANSI Z359.14, and ANSI A10.32 standards.
  • 5 point adjustment
  • 1 Black duffle bag-16.5" (L) x 10" (w) x 8.5" (H)
  • 7, 000 lbs rated heavy- duty nylon/polyester webbing
  • 1 adjustable back D-Ring for fall protection and restraint purpose
  • Mad dog 6' self retractable lanyard

What to Look For in a industrial fall protection?

You may think purchasing seems simple, and it sometimes does the opposite! Studying the outcome of industrial fall protection will take a considerable amount of time. Also, there are multiple sides of industrial fall protection you need to check. That’s the reason why we’re all ready to assist you with industrial fall protection issue.

You should pay more attention to the following criteria of industrial fall protection in 2024:

Ease Of Use

Similar to a car seat or booster, safety gear's convenience is an important factor when deciding its value. There are some requirements that must be met, such as easy-to-use buckles and quick-release buckles. Your standards will determine the ease of your use. This will help you determine how fast it takes to get on and off the gear.

Comfort

The safety harnesses can be very comfortable. You will feel even more comfortable if your harness has padded shoulder straps with no sharp edges.
When choosing a safety harness, make sure you consider your comfort. You'll spend a lot of time wearing the safety harness around your neck. You will be wearing the safety harness almost as often as your first, so it is important to feel comfortable.

Safety Connection Points

Safety points on the harness are the most crucial thing to consider. A good harness should have five safety points, including the chest, shoulders and legs.
These safety points are attached to the body and hold you up when you're in the air.
These safety zones should wrap around your body as much as you can. Some harnesses have many attachment points but they don't feel very comfortable.
Make sure that the straps fit well. A harness that offers lumbar support and soft shoulder pads can be even more comfortable.

Buckles

Construction harnesses are most often associated with leg strap buckles and tongue buckles. These tongue buckles will keep you safe wherever you go.
Your construction harness must have a tongue buckle that can support your weight.
It can't! That would be a defeat of the purpose of wearing a harness at all.
We recommend harnesses that have quick-connect buckles to make life easier. Your safety harness will not feel difficult to wear because the tongue buckles won't be too complicated!
The quicker you can wear your harness with quick-connect buckles the better!

Durability

No matter what product you choose, it is important to consider durability. A majority of harnesses should be durable, particularly if they comply with OSHA standards.
Make sure you inspect your harness before buying it. Check that the stitches are correct, all attachment points and buckles are correctly placed, as well.
It is also worth noting that you may want to look for harnesses made from flame retardant materials. If you work around open flames and want to protect your harness, this is a must.

Size & Adjustments

To ensure the maximum level of fall protection, safety harnesses are available in a variety sizes. You can be sure that you will find the right safety harness for you.
Sometimes, even if you have chosen the correct size, it doesn't fit snugly enough.
You may find it a little loose or tighter, which can lead to discomfort in the long-term.
Adjustability is key. It is important that your safety harness is adjustable to suit you. You'll be more secure and comfortable even after prolonged use.

Weight Capacity

When choosing between safety harnesses to use, make sure you choose the one that is able to support your weight.
This is a crucial aspect that we cannot stress enough. Your harness must be able to support your weight in order to provide maximum protection.
Safety harnesses are capable of supporting 300 pounds on average.

FAQs

Can A Safety Harness Expire?

Safety harnesses eventually will wear out, but there's no expiration date. OSHA does not color-code or date the expiration of the harness. You should ensure that the harness is safe by checking for any damage, such as those at attachment points or stitching.

How Should I Store My Safety Harness?

You should clean any removable padding on the harness. The harness should be kept dry and away from any UV light, chemicals or other substances that could cause damage.

What Safety Harness Accessories Do I Need?

A lanyard is essential, as well as spare D-rings. You can attach your harness to the support system in many ways. Choose the one that's easiest to use. You will also need a hard hat, steel-toed shoes, and a hard jacket.

Can I Write On My Safety Harness?

It is not generally a wise move. The webbing could be damaged by a pen tip, or other ink. It might be harder to spot damage during inspection if there is ink or paint.

What Is Standard Height Of Wearing Safety Harness?

The industry and additional fall hazards will determine the standard height for which safety harnesses are required. OSHA requires that fall arrest harnesses be worn at least 8ft for longshore operations, which is ship cargo loading or unloading, 6ft for construction, and 4ft for industrial purposes.
These measurements should be considered a guideline for estimating the risk of falling and not used in every case. A worker operating from a height of three feet doesn't mean they don't need to use a safety harness, if the work environment still presents a high risk of injury.
It is important for workers and supervisors to be aware of the hazards at work and to ensure that they are protected.

How Long Does A Safety Harness Last?

Although some people believe that safety harnesses should be used for no more than five year, it is not always true. The condition of your safety harness should be considered more than its age. To ensure that your safety harness is in top condition, you should inspect it before using it.

When Should I Wear A Safety Harness?

Your safety harness should be worn whenever there is a possibility of you falling. Although most people use a standard of six feet, it is safer to go with four feet. No matter how small the task, the harness must be used every time.

All in all, anything you need to acquire for your convenient purchase of industrial fall protection is presented above. Admittedly, this information is accurate, thanks to our product consulting experts with a wealth of experience. Furthermore, we keep industrial fall protection of 2024 data up-to-date at all times. It is helpful if you are a busy person. Try to check us as much as possible!

You are expected to contact us if any problems or inaccuracies with industrial fall protection occurs. With your feedback, we can improve our data better!


2 ratings

About Sarah Combs

Sarah Combs
Sarah Combs is a visual editor who loves to travel and hike. She enjoys taking photographs of her journeys, which help her to remember the beautiful places she's been to. Sarah is grateful for the opportunities that she has had to see the world and looks forward to continuing to explore new places in the future. Sarah is the editor of CampfireHQ since 2021 and has written on a variety of topics, from camping, and hiking to other outdoor guides.

Read Sarah's full bio